home contact us site map
Siemens Header
Solutions Partner

Siemens

DESIGO excels in system openness, enabling third-party systems to be integrated at all system levels. It supports components or systems with interfaces such as OPC, BACnet, LON, EIB, ModBus, Konnex and M-Bus. This feature enables the planning engineer to easily integrate existing plant. For the exchange of information, DESIGO uses standardized communication protocols at all system levels.

Supervisors and Displays (Management Level)

The consistent and targeted use of standard technologies and the integrated SCADA (Supervisory Control And Data Acquisition) software enable third-party sytems to be easily and economically connected to DESIGO INSIGHT via BACnet, OPC (OLE for Process Control – OLE = Object Linking and Embedding) or the Weba host of pre-written and tested Scada drivers, etc. This permits homogeneous operation of all types of building services plant. Please feel free to contact us for more information.

Siemens Desigo PC
Desigo Insight
Siemens PXM10
PXM10
Siemens PXM20
PXM20
Siemens PX Touch Display
PX Touch Display
Sample Desigo Insight Graphics
Boiler Graphic AHU Graphic
AHU Graphic Floor Graphic
Management Level Topology
Siemens Management Network topology

Desigo PX (Automation Level)

With its family of freely programmable native BACnet automation stations, DESIGO PX offers maximum flexibility. This means that building services plant can be optimally controlled and monitored. Extensive system functions, such as alarm reporting, time scheduling and trend data storage meet all building services requirements. The automation stations operate autonomously and decentrally and are available in two ranges, compact and modular. Communication takes place via the open BACnet protocol over Lon or UDP/IP.. Please feel free to contact us for more information.

Siemens PXC22-T
Siemens PXC2
Siemens PXM20
Siemens PXM20
IO Module
Siemens TXIO2
Automation Level Topology (PX)
Siemens Automation Network topology

Desigo RX (Field Level)

The RX family has several ranges from the RXA stand alone pre-programmed controller, the RXL communicating pre-programmed controller, the RXC LON based controller and the RXB Konnex based controller. Please feel free to contact us for more information.

RXA Controller
Typical RXA Controller
RXL QAX34.3
RXL and room controller QAX34.3
RXC32.1
RXC32.1
RXB Controller
Typical RXB Controller
Field Level Topology (RX)
Siemens Field Network topology

Older Systems (MS2000, IS1000, TS1500, AS1000 Pronto IRC)

Please feel free to contact us for a planned migration path.

home contact us privacy & security terms of use